The EON210P consists of two 10-inch, two-way, powered loudspeakers, one with a detachable powered mixer and the other with a detachable storage compartment, one pair of unshielded speaker cables and a power cord. Capable of reproducing full bandwidth sound at high levels the 210P is comprised of a 250 mm (10 in) woofer, a 37.5 mm (1.5 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide driven by a 300 watt Crown® Class-D power amplifier and integrated mixer.
Specifications:
* System Power Rating : 300 Watts (2 X 150 Stereo)
* Maximum SPL Output : 124 dB peak system output (pink noise)
* Net Weight of System : 33 lbs. (19 lbs. for unit with powered mixer, 14 lbs. for unit with storage pod)
* System Type : Powered mixer with 2 two-way bass-reflex enclosures
* Frequency Range (-10 dB) : 60 Hz - 20 kHz
* Frequency Response (±3 dB) : 75 Hz - 19 kHz
* AC input : 120 - 240 V 50/60 Hz, voltage selector switch sets operational range
* Amplifier Design : Crown Class D
* Output Connector : 2 X 1/4” TS (unbalanced) amplifier outputs
* Input Connectors : 8 inputs (4 Mono Mic/Line, 2 X Stereo)
* Channels : 1-4 are XLR / 1/4” jack combo connectors, XLR is a mic level input, 1/4” is a line level input. 5-6, one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo). 7-8 is a 3.5 mm stereo jack
* Input Impedance : Ch 1-4 Combo: XLR 3 K Ohms Balanced
* Ch 1-4 Combo: TRS 20 K Ohms Balanced
* Ch 5-6: TRS 25 K Ohms Balanced
* Ch 5-6: RCA 12 K Ohms Unbalanced
* Ch 7-8: 3.5 mm 30 K Ohms Unbalanced
* Phantom Power : 30 V
* Output Connectors : Monitor outputs: one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
* Headphone output : One 3.5 mm stereo jack
* Main Output LED Ladder : Limit: Red LED indicates limiter active condition
* Signal: Green LED indicates signal present
* Signal Indicators: Ch 1-4 : Peak LED: Green = signal present, Red = input overload
* EQ : Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost
* System Limiter : On Board DSP Limiting and Tuning
* LF Driver : 1 x JBL 328 H 250 mm (10 in) woofer
* HF Driver : 1 x JBL 2414H-1 37.5 mm (1.5” ) annular polymer diaphragm, neodymium compression driver
* Coverage Pattern : 100º x 60º nominal
* Crossover Frequency : 2 kHz
* Crossover Type : Passive network, 2nd order filters (-12 dB per octave) for high pass and low pass filters
* Enclosure : Polypropylene
* Suspension/ Mounting : 36 mm pole socket with stabilizing screw
* Handles : One on top
* Grille : Powder coated perforated steel
* Shipping Package (HxWxD) : 21.5” x 26” x 13.75” (546 mm x 660 mm x 349 mm)
No comments:
Post a Comment